GTI Rear Cantilever Kit
This kit fits 2015-2021 Volkswagen GTI
This kit will allow you to relocate your shocks from under your car, to the inside of your trunk, In place of the spring/strut there's an adjustable push rod that attaches to the same place the suspension would. That rod goes up through the tower and connects to the coil-over system in the trunk of the car now. Kind of works the same way except now there's just a rod in the fender-wells. This kit allows keeping expensive coil-over systems clean and free of rust. This also stiffens up the back end, and allows going ever lower without having anything interfere.
Includes:
1.75” x .095” wall tubing that is CNC bent for the structure of the cantilever system.
All hiems/ Misalignment spacers.
Laser Cut and CNC bent 11ga sheet metal.
PizzaBoyMetalWorks Pillow Blocks.
All tubes are etched for easy fit up.
Includes cutting template and instructions.
Note 1: This kit requires cutting holes in your chassis or cutting out the rear end.
Note 2: Relocating your fuel tank is required. (We make Fuel Cell brackets for a 10 Gallon tank, which can also find in our products)
Note 3: This kit comes unassembled/unwelded. Welding, cutting, measuring is required.
We can schedule for an in house install for an extra $1,000
Please allow 3-4 week lead time.
This kit fits 2015-2021 Volkswagen GTI
This kit will allow you to relocate your shocks from under your car, to the inside of your trunk, In place of the spring/strut there's an adjustable push rod that attaches to the same place the suspension would. That rod goes up through the tower and connects to the coil-over system in the trunk of the car now. Kind of works the same way except now there's just a rod in the fender-wells. This kit allows keeping expensive coil-over systems clean and free of rust. This also stiffens up the back end, and allows going ever lower without having anything interfere.
Includes:
1.75” x .095” wall tubing that is CNC bent for the structure of the cantilever system.
All hiems/ Misalignment spacers.
Laser Cut and CNC bent 11ga sheet metal.
PizzaBoyMetalWorks Pillow Blocks.
All tubes are etched for easy fit up.
Includes cutting template and instructions.
Note 1: This kit requires cutting holes in your chassis or cutting out the rear end.
Note 2: Relocating your fuel tank is required. (We make Fuel Cell brackets for a 10 Gallon tank, which can also find in our products)
Note 3: This kit comes unassembled/unwelded. Welding, cutting, measuring is required.
We can schedule for an in house install for an extra $1,000
Please allow 3-4 week lead time.
This kit fits 2015-2021 Volkswagen GTI
This kit will allow you to relocate your shocks from under your car, to the inside of your trunk, In place of the spring/strut there's an adjustable push rod that attaches to the same place the suspension would. That rod goes up through the tower and connects to the coil-over system in the trunk of the car now. Kind of works the same way except now there's just a rod in the fender-wells. This kit allows keeping expensive coil-over systems clean and free of rust. This also stiffens up the back end, and allows going ever lower without having anything interfere.
Includes:
1.75” x .095” wall tubing that is CNC bent for the structure of the cantilever system.
All hiems/ Misalignment spacers.
Laser Cut and CNC bent 11ga sheet metal.
PizzaBoyMetalWorks Pillow Blocks.
All tubes are etched for easy fit up.
Includes cutting template and instructions.
Note 1: This kit requires cutting holes in your chassis or cutting out the rear end.
Note 2: Relocating your fuel tank is required. (We make Fuel Cell brackets for a 10 Gallon tank, which can also find in our products)
Note 3: This kit comes unassembled/unwelded. Welding, cutting, measuring is required.
We can schedule for an in house install for an extra $1,000
Please allow 3-4 week lead time.